IS IT REAL OR LAMINATE?
If laminates looked fake the last time you checked, it’s time to check again!
Today’s laminates are looking better and better, and often need close examination to be identified.
Laminates have truly come a long way. Why?
Because of the growing popularity of laminates, manufacturers are creating an increasing array of traditional, rustic, and exotic wood grain designs.
In fact, presses have improved to the point where the texture imprinted on top of the design looks more real than ever, even with distressed wood or natural stone designs.
QUALITY IS FOCUSED ON THE PHOTOGRAPHY.
The quality of the laminate partially has to do with the photography and the number of photographs per style, which is known as "screens".
Here’s an example for you. When manufacturers emulate a natural stone tile, they try to recreate the variation in color, pattern and texture that is a result of cutting a natural product.
The more screens a product has, the more variation it can offer. And the more “authentic” the laminate looks.
LAMINATE FLOORING TYPES – YOURS WILL BE INSTALLED IN ONE OF THESE 4 FORMS.
GLUELESS LAMINATE FLOORING.
No mess, glueless installation makes these floors quick and easy-to-install.
They come in a variety of ceramic and wood designs and colorations, as well as some manufacturers offer a real, hardwood veneer instead of a printed layer. It looks amazingly hardwood-like.
These floors come in both planks and squares. A thin, plastic underlayment is needed to seal out moisture from below. (Remember, moisture is the enemy of your flooring.)
In fact, most laminate floors require a plastic underlay sheet (4 mil poly) be installed directly underneath the laminate planks or tiles.
This helps the floor float freely over the subfloor. Another option is to add a vapor barrier or noise reduction underlay before installing the laminate flooring.
Moldings are the finishing touch.
Laminate moldings also affect the overall style and give your room a beautiful finished look.
Moldings are important because they cover the space that is allowed for the flooring to expand and move naturally on top of the subfloor, and they help with the transition to an adjacent floor.
Most manufacturers offer coordinating moldings for all styles and colors for any laminate flooring you choose.
However, be aware that moldings for laminates are slightly larger than their wood or ceramic tile counterparts.
Here, to familiarize you with various standard moldings, are some styles and definitions.
The Step Down Stairnose is a coordinating piece providing the proper transition for all the steps in your home.
A Reducer Strip is the transitional piece the installers use to connect the laminate with another type of floor covering such as vinyl, thin ceramic tile, or low-pile carpeting.
An End Molding or Carpet Reducer is used as a transition from laminate floors to different flooring surfaces when the reducer does not allow enough height, such as on high-pile carpet or thick ceramic tile.
T-Molding is commonly used in doorways to join two laminate floors in adjoining rooms. It's also recommended when making transitions from a laminate floor to another floor that is approximately the same height.
Finally, a Quarter Round may be installed wherever the laminate floor meets the wall or baseboard.
We recommend that you work closely with us to become familiar with the moldings and transition pieces.
Ask to see samples if possible, so there are no surprises come installation time.
With a lot of knowledge, hopefully from the above, and a little imagination (that’s your department), you will find a laminate flooring that is just right for you and your home.